Legacy Sedan Diffuser (05-09 Legacy)

From: $360.00

  • *Finish

    • $

    *Fins

    *Strake Size Change

    *Please email us before placing your order with strake size change to confirm fitment.
    • 15 $
    • $

    Please Email

Description

Legacy Sedan Diffuser

The Legacy Sedan Diffuser is a perfect fit for all 2005, 2006, 2007, 2008, and 2009 Subaru Legacy Models

Below are detailed installation instructions for Subaru Legacy Sedan applications.

  • First start off by assembling your diffuser. All bends on the fins will face the inside. The
    bend on the main panel will go up to reduce drag when installed. The outside fins will
    have a slot that goes around the mounting holes. The square in the middle is for the OEM
    tow hook to fit through.
  • Jack vehicle up and support with jack
    stands securely. Remove two factory
    pop clips from bumper near the
    exhaust.
  • Insert 1” long ¼”-20 bolts through holes and fasten nut with washer and lock washer so
    it’s tight in the hole. You may need to adjust a little so it lines up with the holes on the
    diffuser.
  • Remove the back bolt in the heat shield above the mufflers with a 10mm socket or
    wrench.
  • Install provided bracket using the same
    screw. The bracket tab should be facing the
    outside of the vehicle and the bottom side
    should be facing the center of the vehicle.
    Do not tighten yet.
  • Once your brackets are in ,bolts installed in the front and diffuser assembled you are
    now ready to install the main section.
  • Using the bolts up front line up the two holes in the diffuser and fasten the included
    washers and nuts. Wait to tighten.
  • Attach the brackets in the back holes.
  • Now go through and tighten all remaining bolts and screws.
  • Side fins will line up with holes already in lower panel. Use included hardware to attach
    side fins. The bend should be facing the inside of the vehicle.

[media-downloader media_id=”472″ texts=”You can also download instructions here.”]

Professional Installation Recommended on all ESC Fabrication’s products.

Additional information

Weight 12 lbs
Dimensions 30 × 24 × 5 in

Reviews

There are no reviews yet.

Be the first to review “Legacy Sedan Diffuser (05-09 Legacy)”

Your email address will not be published. Required fields are marked *